ANZZI CORAL Freestanding Tub Filler: Satin Brass Floor-Mount Faucet with Hand Shower
- Lifetime warranty
- Ships from our Jacksonville, FL warehouse
A high arc over the tub.
A floor-mounted freestanding tub filler in satin brass, with a tall swan-like spout, one lever for temperature and flow, and a diverter for the 60-inch pull-out hand shower. It suits a clawfoot or slipper tub and looks just as good beside a modern oval.
Specifications
| Finish | Satin brass |
| Mounting type | Floor-mounted, single hole |
| Installation type | Hose-fed, no rough-in valve |
| Spout height / reach | 36" / 9" |
| Overall dimensions | 46" H x 8" L x 6.3" W |
| Hand shower | Included, 60" hose |
| Water pressure | 20–125 PSI |
| Weight | 13 lbs |
| Warranty | Limited lifetime (manufacturer); register within 90 days |
Why the Coral
- The 36" spout height clears the rim of every Gramans tub (22.8"–29.5").
- Hose-fed installation, with no valve to bury in the floor.
- Solid brass valves and easy-grip lever handles.
- $14 flat shipping, free over $500.
Installation at a glance
Two inlet hoses run through the post and a 2" hole in the floor to your supply lines. You’ll need a wrench, a drill with a 25/64" bit, and a 2" hole saw. We recommend a licensed plumber.
Download the installation guide for this freestanding tub filler📥:
$14 flat shipping. Free on orders over $500.
Fillers ship anywhere in the contiguous 48 United States for a flat $14, and orders over $500 ship free. Your shipping cost is always shown at checkout before you pay.
Each product page shows an estimated ship window. It’s our best estimate, not a guarantee, and it can change with stock and carrier schedules.
Keep the packaging.
Every filler is packed in its original manufacturer carton with protective inserts. Please keep all packaging until the filler is installed and tested, in case you need to return it or file a claim.
Check it within 48 hours.
Open the carton and compare the contents with the packing list, including the hand shower, hose and mounting hardware where listed. If anything is damaged or missing, email team@gramansbathware.com within 48 hours of delivery with your order number and photos of the packaging and product. We’ll make it right at no cost to you.
30 days to change your mind.
If the filler is unused, uninstalled and complete in its original packaging, email us within 30 days of delivery and we’ll arrange the return. We email you a prepaid return label, so you won’t need to sort out shipping yourself; you’re just covering what it costs. You’ll be responsible for the return shipping and a 20% restocking fee, both deducted from your refund.
We’d rather tell you that now than surprise you later. Every return costs us shipping, inspection and repackaging, and we’d sooner keep our prices low than build free returns into what everyone pays.
Once a filler has been installed or run with water, it can’t be resold as new, so it’s no longer eligible for a change-of-mind return. If you’re unsure about fit, email us before you install and we’ll check the spout height and reach against your tub with you.
If your filler arrives damaged, or turns out to be faulty, none of that applies. We cover it completely: no fee, no return shipping, nothing for you to arrange. All we ask is that you open the carton, check it within 48 hours of delivery, and let us know. That’s what lets us claim against the carrier, and it’s what lets us take care of it entirely, at no cost to you. A defect that only shows up after installation is handled under the Warranty tab.
Limited lifetime warranty from the manufacturer.
Your filler is covered against defects in materials and workmanship, for the original purchaser, for residential use. If a product or part proves defective, the manufacturer replaces it free of charge. Shipping and labor costs aren’t covered.
Register within 90 days of delivery at anzzi.com/register to activate it.
To make a claim, call 1-844-44-ANZZI (1-844-442-6994) with your proof of purchase.
Not covered: misuse, improper installation or maintenance, hard water or mineral deposits, commercial use, and scratches after installation.
Download the manufacturer’s warranty document📥:
This warranty is separate from the 5-year warranty on Gramans bathtubs. It gives you specific legal rights, and you may have other rights that vary by state.
Will it work with my tub? Check three lines in the specs above: mounting type, spout height and spout reach. The spout needs to clear your tub’s rim and reach over the water. Freestanding tubs have no faucet holes, and your tub’s height is on its product page. If it’s close, email us before you buy and we’ll check it with you.
Does it need a rough-in valve? It depends on the model. Some fillers use a valve concealed in the floor or wall, and others connect by flexible hoses straight to the supply lines and need none. The “Installation type” line in the specs above tells you which.
What has to be in place before installation? The hot and cold supply lines need to be positioned where the manufacturer’s manual specifies. Depending on the model, that’s through the floor, in the wall or at the tub deck. On a concrete slab or a finished wall, that can mean cutting in, so plan it with your plumber before the finishes go on.
Do I need a plumber? We’d recommend it. The supply lines have to be positioned correctly, every connection has to be leak-tight, and some manufacturers’ warranties require professional installation. The guide is in the “Installation Guide” tab if you’d like to look before you buy.
Does it come with a hand shower? The specs above tell you, and if there is one, they list the hose length.
Does it include the tub drain? No, a filler only brings water in. The drain comes with your tub: a matching white drain and overflow on ours, chrome on the Valkenburg.
Do you publish spout height and reach? Yes, on every product page, along with mounting type, flow rate and installation type. Whether a filler suits your tub and your room comes down to those numbers, so we list them up front.
How do I look after it? Warm water, a mild soap and a soft cloth, and rinse any cleaner off right away so it doesn’t sit on the finish. Keep abrasive powders and scouring pads away from it. If the flow slows down, clean the flow regulator or aerator, since calcium build-up is the usual cause. Your model’s manual has any finish-specific care.
This product is certified to CSA B45.5-22/IAPMO Z124-2022, the North American standard for plumbing fixtures.
It meets the requirements of:
- Uniform Plumbing Code (UPC®)
- National Plumbing Code of Canada
- National Standard Plumbing Code
